astra trace ring — matte finish
Product Description
A three-dimensional star-shaped ring crafted in 925 sterling silver, featuring a star motif measuring approximately 2 cm.
Lab-grown diamonds are delicately set against its matte-finished silver surface.
At the center, one approximately 3.5 mm lab-grown diamond is set, while five approximately 0.8 mm lab-grown diamonds are arranged along the contours of the star.
The raised, dimensional form of the star, the lines flowing along its edges, and the silver band extending seamlessly from the motif come together in a strong, sculptural silhouette.
Due to the handcrafted nature of this piece, slight variations may occur in its form, finish, and stone placement.
Surface textures and setting details may appear more pronounced in enlarged images than they do in person.
Product Details
Material: 925 Sterling Silver
Stone: Lab-grown diamon
Center Stone
- 1 Individually Graded Lab-grown Diamond (approximately 3.5 mm / D / VS1 / Excellent)
Star Accents
- 5 Lab-grown Diamonds (approximately 0.8 mm)
Certificate
- Individual grading report included (for the front center stone only).
Color: Silver
Finish: Matte
Star Motif: Approx. 2 cm
Band Width: Approx. 4mm
Band Thickness: Approx. 1.7mm
Ring Size: Please refer to the available size options
※ Custom sizes are available upon request. Please contact us via email or Chat with your preferred ring size before placing your order.
※ International sizes are approximate conversions. Please refer to the inner diameter for the most accurate fit.
※ Due to the dimensional form and weight of the star motif, we recommend confirming your ring size before ordering for a comfortable and secure fit.
Origin: Individually hand-constructed in Seoul
Due to the nature of handcrafting, there may be slight variations in form, finish, and stone-setting position.
In enlarged images, surface texture and setting details may appear more pronounced than they do in person.
Ring Sizing Guide
1. easure an Existing Ring
-Place a ring that fits the intended finger comfortably on a flat surface.
-Measure straight across the widest part of the inside of the ring.
-Measure only the inner diameter, excluding the thickness of the band, and compare it with the diameter listed for each size option.
2. Measure with Paper or String
-Wrap a narrow strip of paper or a non-stretch string around the widest part of your finger.
-Make sure it is neither too tight nor too loose, then mark where the ends meet.
-Lay it flat and measure the marked length in millimeters.
-Measurements taken with paper or string may vary slightly and should be used as a guide only.
※Size Measurements
KR 10 / JP 10 / US 5.5 / EU 50
Inner Ø 16.0 mm / Inner Circ. approx. 53 mm
KR 11 / JP 11 / US 5.75-6 / EU 51
Inner Ø 16.3 mm / Inner Circ. approx. 54 mm
KR 12 / JP 12 / US 6-6.25 / EU 52
Inner Ø 16.7 mm / Inner Circ. approx. 55 mm
KR 13 / JP 13 / US 6.5 / EU 53
Inner Ø 17.0 mm / Inner Circ. approx. 56 mm
KR 14 / JP 14 / US 7 / EU 54
Inner Ø 17.3 mm / Inner Circ. approx. 57 mm
KR 15 / JP 15 / US 7.5 / EU 55-56
Inner Ø 17.7 mm / Inner Circ. approx. 58 mm
※ International size conversions may vary by country and brand. For the most accurate fit, please refer to the inner diameter listed for each size option.
※ Custom sizes are available upon request. Select Custom Size and enter your preferred ring size in the order notes.
Bracelet Sizing Guide
-Measure your wrist circumference using a measuring tape or a strip of paper about 1 cm wide, placed around the position where the bracelet will sit.
-If you prefer a slightly looser fit, we recommend adding approximately 1 cm to your measured wrist size.
-Compare your wrist measurement to the total length (Length) indicated on each product page to choose the most suitable size.
-Due to the nature of handcrafted production, slight variations may occur from piece to piece.
Necklace Sizing Guide
1. Using thread or a thin string
-Wrap the thread lightly around your neck at the position where you’d like the necklace to sit.
-Pinch the point where the ends meet.
-Lay the thread flat and measure it with a ruler to find your worn length.
2. Using a paper strip
-Cut a long strip of paper about 1–2 cm wide and wrap it around your neck.
-Mark where the ends meet, then lay it flat and measure the distance.
-Paper provides a firmer, more accurate measurement than thread.
3. Measuring an existing necklace
-Lay your necklace flat and measure from end to end, including the clasp.
-This method is the most accurate if you already know your preferred fit.
Additional Notes
-Light and Shade lists sizes based on the actual worn length, including the clasp.
-Fit may vary slightly depending on the chain structure and overall design.
-If you are between sizes, we recommend opting for the slightly longer option.
