astra mote earring — polished finish
※ This item is sold as a pair. For a single earring, please contact us via chat or email.
Product Description
A pair of 925 sterling silver earrings designed in the smallest star form within the astra trace series.
Within their compact scale of approximately 0.8 cm, the polished earrings feature a dimensional star silhouette and delicate lines.
The smoothly polished surface reflects the light, creating a brighter and more luminous appearance.
At the center of each earring, one approximately 1.5 mm round lab-grown diamond is set.
The body is crafted in 925 sterling silver, while the ear posts are made of 14K gold.
Finished with custom cylinder-shaped earring backs designed by Light and Shade, the earrings retain a sculptural sense of volume and a refined finish despite their small scale.
※ This piece shares the same design, dimensions, materials, stone setting, and closure as the astra mote earring — matte finish; only the surface finish differs. For closer views of its form and construction, please refer to the detailed images on the matte finish product page.
Surface textures and setting details may appear more pronounced in enlarged images than they do in person.
Measuring approximately 0.8 cm, the earrings maintain a restrained surface texture and subtle presence when worn.
Product Details
Body: 925 sterling silver
Ear Posts: 14K gold
Stone: Lab-grown diamond
Center Stone: 1 approximately 1.5 mm round lab-grown diamond per earring
Closure: Custom cylinder-shaped earring backs
Size: Approximately 0.8 cm
Color: Silver
Finish: Polished
Production: Individually handcrafted in Seoul
Composition: One pair of earrings
Each piece is handcrafted, and slight variations in form, finish, and stone-setting position may occur.
Ring Sizing Guide
1. easure an Existing Ring
-Place a ring that fits the intended finger comfortably on a flat surface.
-Measure straight across the widest part of the inside of the ring.
-Measure only the inner diameter, excluding the thickness of the band, and compare it with the diameter listed for each size option.
2. Measure with Paper or String
-Wrap a narrow strip of paper or a non-stretch string around the widest part of your finger.
-Make sure it is neither too tight nor too loose, then mark where the ends meet.
-Lay it flat and measure the marked length in millimeters.
-Measurements taken with paper or string may vary slightly and should be used as a guide only.
※Size Measurements
KR 7 / JP 7 / US 4 / EU 47
Inner Ø 15.0 mm / Finger Circ. approx. 50 mm
KR 8 / JP 8 / US 4.5 / EU 48
Inner Ø 15.3 mm / Finger Circ. approx. 51 mm
KR 9 / JP 9 / US 5 / EU 49
Inner Ø 15.7 mm / Finger Circ. approx. 52 mm
KR 10 / JP 10 / US 5.5 / EU 50
Inner Ø 16.0 mm / Finger Circ. approx. 53 mm
KR 11 / JP 11 / US 5.75–6 / EU 51
Inner Ø 16.3 mm / Finger Circ. approx. 54 mm
KR 12 / JP 12 / US 6–6.25 / EU 52
Inner Ø 16.7 mm / Finger Circ. approx. 55 mm
KR 13 / JP 13 / US 6.5 / EU 53
Inner Ø 17.0 mm / Finger Circ. approx. 56 mm
KR 14 / JP 14 / US 7 / EU 54
Inner Ø 17.3 mm / Finger Circ. approx. 57 mm
KR 15 / JP 15 / US 7.5 / EU 55–56
Inner Ø 17.7 mm / Finger Circ. approx. 58 mm
※ International size conversions may vary by country and brand. For the most accurate fit, please refer to the inner diameter listed for each size option.
※ Custom sizes are available upon request. Select Custom Size and enter your preferred ring size in the order notes.
Bracelet Sizing Guide
-Measure your wrist circumference using a measuring tape or a strip of paper about 1 cm wide, placed around the position where the bracelet will sit.
-If you prefer a slightly looser fit, we recommend adding approximately 1 cm to your measured wrist size.
-Compare your wrist measurement to the total length (Length) indicated on each product page to choose the most suitable size.
-Due to the nature of handcrafted production, slight variations may occur from piece to piece.
Necklace Sizing Guide
1. Using thread or a thin string
-Wrap the thread lightly around your neck at the position where you’d like the necklace to sit.
-Pinch the point where the ends meet.
-Lay the thread flat and measure it with a ruler to find your worn length.
2. Using a paper strip
-Cut a long strip of paper about 1–2 cm wide and wrap it around your neck.
-Mark where the ends meet, then lay it flat and measure the distance.
-Paper provides a firmer, more accurate measurement than thread.
3. Measuring an existing necklace
-Lay your necklace flat and measure from end to end, including the clasp.
-This method is the most accurate if you already know your preferred fit.
Additional Notes
-Light and Shade lists sizes based on the actual worn length, including the clasp.
-Fit may vary slightly depending on the chain structure and overall design.
-If you are between sizes, we recommend opting for the slightly longer option.
