astra trace pendant — large · pendant only
※ This item is sold as a pendant only.
Chain is not included and can be purchased separately.
Product Description
A three-dimensional star-shaped pendant crafted in 925 sterling silver, measuring approximately 3 cm.
Lab-grown diamonds are softly set across the matte-finished silver surface.
At the front center, an IGI-certified lab-grown diamond (approximately 5.1 mm) is set, while five approximately 1 mm lab-grown diamonds and five approximately 0.8 mm lab-grown diamonds are arranged along the five points of the star.
At the center of the back, one approximately 2 mm lab-grown diamond is set,
revealing a small hidden light even from the reverse side.
The raised dimensional silhouette and the lines flowing along the edges
leave a subtle trace of light, like a small orbit.
This item is sold as a pendant only.
Chains and compatible parts are sold separately.
Additional chains and compatible parts designed to be paired with the pendant will be introduced over time.
Due to the nature of handcrafting, there may be slight variations in form, finish, and stone-setting position.
In enlarged images, surface texture and setting details may appear more pronounced than they do in person.
Product Details
Material: 925 Sterling Silver
Stone: Lab-grown diamond
Center Stone
- 1 IGI Certified Lab-grown Diamond (0.50 ct, approximately 5.1 mm / D / VVS2 / Ideal)
Star Accents
- 5 Lab-grown Diamonds (approximately 1 mm)
- 5 Lab-grown Diamonds (approximately 0.8 mm)
Back Center Stone
- 1 Lab-grown Diamond (approximately 2 mm)
Certificate
- Individual IGI certificate included for the front center diamond only.
Color: Silver
Size: Approximately 3 cm
Composition: Large pendant only
Origin: Individually hand-constructed in Seoul
This item is sold as a pendant only.
Chain and compatible parts are sold separately.
Due to the nature of handcrafting, there may be slight variations in form, finish, and stone-setting position.
In enlarged images, surface texture and setting details may appear more pronounced than they do in person.
Ring Sizing Guide
1. easure an Existing Ring
-Place a ring that fits the intended finger comfortably on a flat surface.
-Measure straight across the widest part of the inside of the ring.
-Measure only the inner diameter, excluding the thickness of the band, and compare it with the diameter listed for each size option.
2. Measure with Paper or String
-Wrap a narrow strip of paper or a non-stretch string around the widest part of your finger.
-Make sure it is neither too tight nor too loose, then mark where the ends meet.
-Lay it flat and measure the marked length in millimeters.
-Measurements taken with paper or string may vary slightly and should be used as a guide only.
※Size Measurements
KR 7 / JP 7 / US 4 / EU 47
Inner Ø 15.0 mm / Finger Circ. approx. 50 mm
KR 8 / JP 8 / US 4.5 / EU 48
Inner Ø 15.3 mm / Finger Circ. approx. 51 mm
KR 9 / JP 9 / US 5 / EU 49
Inner Ø 15.7 mm / Finger Circ. approx. 52 mm
KR 10 / JP 10 / US 5.5 / EU 50
Inner Ø 16.0 mm / Finger Circ. approx. 53 mm
KR 11 / JP 11 / US 5.75–6 / EU 51
Inner Ø 16.3 mm / Finger Circ. approx. 54 mm
KR 12 / JP 12 / US 6–6.25 / EU 52
Inner Ø 16.7 mm / Finger Circ. approx. 55 mm
KR 13 / JP 13 / US 6.5 / EU 53
Inner Ø 17.0 mm / Finger Circ. approx. 56 mm
KR 14 / JP 14 / US 7 / EU 54
Inner Ø 17.3 mm / Finger Circ. approx. 57 mm
KR 15 / JP 15 / US 7.5 / EU 55–56
Inner Ø 17.7 mm / Finger Circ. approx. 58 mm
※ International size conversions may vary by country and brand. For the most accurate fit, please refer to the inner diameter listed for each size option.
※ Custom sizes are available upon request. Select Custom Size and enter your preferred ring size in the order notes.
Bracelet Sizing Guide
-Measure your wrist circumference using a measuring tape or a strip of paper about 1 cm wide, placed around the position where the bracelet will sit.
-If you prefer a slightly looser fit, we recommend adding approximately 1 cm to your measured wrist size.
-Compare your wrist measurement to the total length (Length) indicated on each product page to choose the most suitable size.
-Due to the nature of handcrafted production, slight variations may occur from piece to piece.
Necklace Sizing Guide
1. Using thread or a thin string
-Wrap the thread lightly around your neck at the position where you’d like the necklace to sit.
-Pinch the point where the ends meet.
-Lay the thread flat and measure it with a ruler to find your worn length.
2. Using a paper strip
-Cut a long strip of paper about 1–2 cm wide and wrap it around your neck.
-Mark where the ends meet, then lay it flat and measure the distance.
-Paper provides a firmer, more accurate measurement than thread.
3. Measuring an existing necklace
-Lay your necklace flat and measure from end to end, including the clasp.
-This method is the most accurate if you already know your preferred fit.
Additional Notes
-Light and Shade lists sizes based on the actual worn length, including the clasp.
-Fit may vary slightly depending on the chain structure and overall design.
-If you are between sizes, we recommend opting for the slightly longer option.
